简单的幸福

昨天的日志发布了Mac OS X 10.5 Leopard下载地址，对于使用PC并且希望将MacOS装在PC上的朋友,国外的网友给出了安装教程，我们可以参考一下。

全部过程需要：

一个动过手脚的DVD镜像
一个包含补丁的Zip文档
一个被格式化为FAT32的闪存

补丁文件可以在OSx86 Scene论坛下载到,有兴趣的朋友跟着Hack Attack的教程做就可以了.含图及相关链接.

安装过程： Hack Attack : Install Leopard on your PC in 3 easy steps!

Installing Leopard 9a581 GM on a Hackintosh  


Patch your 9A581 (GM) DVD 下载

附上Mac OS X 10.5 Leopard PC安装教程全文：

Step 1. Getting things ready  

Burn the DVD Image onto a Single Layer DVD-R using a software like Nero.
Format the USB Flash Drive and the drive label should be "Patcher" without the quotes. Please note it has to be "Patcher" only and nothing else for the patch to work when we apply it later.
Extract the Zip file and put its contents into the USB Flash Drive.
Now your USB Drive should contain a folder called "files", if it doesn’t then check to see where you have gone wrong.


Step 2. Installing Leopard

Now that you have the Patched DVD with you, you can now install Leopard. Pop in the DVD into the drive and boot into it by pressing F12 at the BIOS Prompt.
Boot into the DVD and the installer should now load. It take a while though, so be patient.
Select your Language and make sure you select Customize and you need to deselect all the packages that are displayed.
Leopard will now install. This can take a while, so go grab yourself a coffee.
It will ask you to Reboot, so go ahead and Reboot. Before rebooting make sure that USB Flash Drive is connected to the PC.


Step 3. Patching Leopard

Now that you have got Leopard installed, you need to patch it. Before we do that Boot into the Leopard DVD like the way you did before.
Wait for the Darwin Bootloader to load. Once it loads up press F8. You should now see a prompt. Type -s and hit enter. The DVD will now load in Verbose mode. Watch for any errors. It should load without a problem because you have already installed Leopard.
Once the setup is loaded select your Language. Once done you should now be seeing the Welcome Screen. Once there navigate to Utilities-Terminal.
Once the terminal loads up, you now need to browse to your USB Drive, so follow the steps below, typing it exactly as it appears below in the Terminal.
In the command line type the following as they appear here

cd ..
cd ..
cd Volumes
cd Patcher
cd files

Notice the space between cd and the 2 dots.

Now its the time to run the patcher to make sure Leopard will work on your PC. Type the following into the Terminal.
./9a581PostPatch.sh

The Patch should now run. You can answer Yes while removing the ACPUPowerManagement.kext
After the Script is done, you should now be able to Boot into Leopard after you restart.


Step 4. Congratulations! You’ve done the Impossible!